KEEN Men's Snapline RatchetFit 6" CSA Work Boot - 1031646

Colour :

Width :

Size :

Hurry, 2 item(s) left in stock!

Vendor: Keen Footware

Type: 6 inch Hiker Boot

Colour

Width

Size

$299.95

Features:

KEEN.DRY waterproof, breathable membrane seals out moisture from the inside
Heat-resistant rubber outsole rated up to 572°F/300°C
Cement construction for flexible, lightweight performance.
KEEN.LOCKFIT firm U-shaped support provides extra heel stability
Eco Anti-Odour for natural, pesticide-free odour control
Environmentally preferred premium leather from LWG-certified tannery for cleaner water
PFAS-free, durable water repellent repels water just as well as forever chemicals without harming the planet

Materials:

KEEN.ReGEN+ midsole is lighter and more compression-resistant, providing over 60% energy return for a more responsive feel
Oil- and slip-resistant non-marking rubber outsole
Electrical hazard (EH) or Electric Shock Resistant (ESR) footwear helps provide a secondary source of protection in case of accidental outsole contact with live electrical circuits
Water-resistant leather + engineered mesh upper
Removable metatomical dual density insole for comfort and support
KEEN.RATCHETFIT single-dial mechanical lacing system for precision fit
Plastic Hardware
Leather Thickness: 1.80-2.00mm
Mesh liner provides breathability to help keep feet cool in warm environments

Care:

Gently brush with a soft, damp sponge to remove loose dirt. Treat stains right away with a gentle cleaner.

Safety Features:

Left and right asymmetrical, non-metallic carbon toes offer unobtrusive fit and are 15% lighter than steel
Non-metallic, flexible woven-textile puncture resistant midsole plate provides underfoot protection. Plate itself meets ASTM and/or CSA requirements.
Reflective webbing for additional safety and visibility
Meets ASTM F3445-24 and F2413-18 M I/75 C/75 EH standards
Meets ASTM F2913-24 SATRA non-slip testing standards
Meets ASTM F1677-96 Mark II non-slip testing standards
Outsole and midsole meets ASTM D471-06 903# oil and isooctane chemical resistance standards
Meets CSA Z195-14 Grade 1 standards for protection

Check that the dial, lace guides, and laces are in good working order.
To tighten, press the head of the dial directly in until it clicks. Rotate clockwise until the laces feel snug.
After a few steps, you may feel the laces redistribute tension or loosen slightly. This is normal. Just re-tighten the dial and go.
To loosen, pull the head of the dial directly out until it clicks. Then pull the boot’s tongue toward the front of your foot.

Notes: Do not overtighten. Do not disassemble the KEEN.RATCHETFIT system.